http://www.raimotorsport.com/European-Auto-Service-and-Repair-s/14263.htm http://www.raimotorsport.com/Articles.asp?ID=241
Click for the BBB Business Review of this Auto Services in Dundalk MD
>

Enter Your Email To Sign Up
For Our E-Newsletter:

 

RAI B7 A4 2.0T Catch Can Kit *With Updated Lines*
RAI B7 A4 Catch Can Kit
 
Alternative Views:
List Price: $375.00
Our Price: $375.00


Product Code: RAI_B7_CC
Qty:

Description
 
Discontinued

Why does your B7 A4 need a catch can? There are two reasons:

  • The OEM PCV system on the 2.0T FSI engines is a known failuire point. Even on completely stock cars, the PCV valve is known to fail without warning, leaving you and your car stranded.
  • The 2.0T FSI engines are direct injection. This means your engine no longer has fuel spraying through the intake manifold, which would in turn travel over the intake valves. The lack of fuel flowing past the valves means you get a lot of combustion gas build-up on the back side of the valves. This hurts performance as well as fuel mileage.

The RAI B7 A4 Catch Can system solves both these problems. It uses a solid billet breather plate that bolts directly to the valve cover. This eliminates the failure prone selection valve. A perfect copy of the factory block PCV fitting is machined directly into plate. This allows you to re-use the original hose from the block.

The catch can it self is 6061 TIG welded aluminum. It feautres internal baffles which help prevent oil from making its way back into the intake. It also utilizes a drain plug on the bottom for seamless servicing. An aluminum mounting plate is also included with all necessary hardware.

Last but not least, why clutter your engine bay with cheap rubber hose and clamps? Our catch can kit features stainless steel braided lines and high quality compression fittings for a sleek under the hood look. They are the most effective way of ensuring a completely sealed system.

Here is a list of everything that is included:
  • Catch can with drain plug
  • Aluminum mounting plate with ALL hardware
  • 2 nylon covered braided stainless steel lines with all necessary fittings.
  • FSI Plug and Tap for intake manifold - Includes threaded nipple for boost gauge or aftermarket diverter
  • Billet aluminum breather plate

All parts carry a limited lifetime warranty.

**The updated lines allow the 2.0T engine cover to snap into place**

**Now available with a 1.5" re-usable filter on top of the catch can for non recirculating systems. Includes all necessary hardware to block-off intake recirculation. This is perfect for big turbo set-ups. Please specify in order notes**


Browse for more products in the same category as this item:

Audi > A4 > B7 (06-08)
Unitronic Chipped - Authorized Dealer

VW / Audi / Seat / Skoda / Porsche / Opel
Chip Tuning / performance Software

www.unitronic-chipped.com Built with Volusion